www.qtv.com
14
www.autocue.com
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e
Grou
p
Ltd
Section 4:
Assembly Procedures
Attach mounting bracket to your chosen plate
Attach Pro Plate to a tripod
MSP17
Assembly and Installation
Guide
6. When you have found the correct position on the tripod slide, secure the
carriage slide in position by tightening the locking lever.
4.4: Attach mounting bracket to your
chosen plate
Ensure that the plate is securely attached to a tripod.
N
OTE
:
An Autocue mounting bracket is attached in the same way to
a Pro, Fixed or Swing-arm plate. The photographs below show
a Fixed Plate for illustrative purposes only.
1. Loosen the knurled locking rings on the adaptor rods at the front of the
plate.
2. Place the openings in the keyhole plates over the ends of the adaptor
rods.
N
OTE
:
Ensure the keyhole plates remain in front of the locking rings.
