Instruction guide
T-SB
– 1234150
4
Autochair Ltd
Assembly instructions
Before assembling, make sure you have the following parts:
•
T-MPL
• Hand control with cable
• Leg & Pivot Assembly
• Spreader Bar
• Power Pack (Charged)
• Main Handle
• Leg Operating Handle
• Charger
1. Release the Handle
Catch
2. Lift the back of the
Handle from the cradle.
3. Slide the Handle out
from the legs and lift.
4. Fit the handle into the
Pivot Assembly as in the
diagram above
5. Fit the leg operating
handle into the Pivot
Assembly as in the
diagram above.
6. Pull the handle
toward you and move
the legs to the centre
position (The handle will
be in line with the post).
When the handle is
released it will spring
back into a locking hole.
The legs will now be
parallel, this is the
narrowest position which
can be used to carry a
person.
