7
Smart Lifter – LP Range
www.autochair.co.uk
2. Safety
VEHICLE POSITIONING
Be sure your vehicle is parked on flat, level ground and the handbrake is engaged before attempting
to lift a mobility product. Before lowering ensure that the Smart Lifter is fully out of the vehicle, other-
wise your mobility device may come into contact with your vehicles bumper.
Before lifting the mobility product for the first time, operate the Smart Lifter without a load until you
are familiar with the controls and how the Smart Lifter operates.
Any adjustment to the Smart Lifter settings must only be carried out by an Accredited Autochair Dealer.
Your Smart Lifter should be serviced every year to ensure it is in good working order.
If in doubt about any aspect of your Smart Lifter, contact your Accredited Autochair Dealer.
WARNING!
The Smart Lifter must never be operated by a child or any person not
deemed appropriate by the technician who installed it.
WARNING!
The safety R-clip must be fitted into the top pin in the A-Frame
before operating.
WARNING!
Note the position of all pinch point warning labels stating “Keep Clear”.
Never place your hands in these locations when the Smart Lifter is in operation.
WARNING!
The Smart Lifter must never be used to lift items other than the mobility
product it was originally installed and set-up to lift. If you wish to lift additional mobility
products, contact your Accredited Autochair Dealer.
WARNING!
Never use an Smart Lifter that has signs of damage or excessive wear.
WARNING!
Do not exceed the maximum stated lifting capacity.
WARNING!
Misuse of the Smart Lifter may result in serious injury and damage to
the unit or vehicle.
WARNING!
Attempting to lift a mobility product when a vehicle is not on level
ground will cause the mobility product to swing toward or away from the vehicle,
making it difficult to get the mobility product into the vehicle.
