Auto Vox K10, Руководство пользователя

Страница: 13 / 56

10
T
roubleshooting
Q1: The ignition is on and the R-gear is engaged, but the monitor display is blank.
1) When you charge the monitor, the brand logo is not displayed on the screen.
①
Possible cause : The monitor or the car charger is broken.
Solution : Power the monitor, if the red light on OK is always on after 15 seconds which indicates the monitor is broken, please replace
the monitor; if the red light doesn’t come on, please check if the connection between the monitor cable and car charger cable
is poor contact, if the connection is ok which indicates the car charger is broken, please contact us to replace the car charger.
（
Customer service email
:
service@auto-vox.com
）
2) When you charge the monitor, the brand logo is displayed on the screen.
①
Possible cause : The signal from the transmitter isn't strong enough.
Solution : Please keep the camera away from the metal or sealed place, and put the camera
close to the monitor as possible as you can.
②
Possible cause : The camera is broken or the cables may be not correctly connected or
loose.
Solution : Cover the camera sensor with your finger, if the infrared lights doesn’t come on,
then use the test pencil to check if the camera cable has power; if yes, which
indicates the camera is broken, please replace the camera; if no, please check
if the cables are connected to the reverse light correctly and tightly.
③
Possible cause : The camera doesn’t pair to the monitor well.
Solution : Try re-pair the camera with monitor. Refer to the “Pair the Camera” section on page P8.
Sensor
Infrared lights