Installation Steps
NOTE: Actual application may vary slightly from illustrations.
3
5
Page 2 of 2
6
Repeat Steps 1-8 for opposite side.
Align visor to the previously cleaned surface. With the visor in its
final position, remove the remaining tape liner by pulling on free
ends.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
© 2005 Lund International, Inc. All rights reserved.
Auto Ventshade
TM
, the Auto Ventshade
TM
logo and the AVS
TM
logo are trademarks of Lund International, Inc.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
™
4 Piece Set
4
Clean the painted surface of the window
frame with an alcohol pad, and wipe dry
with a soft cloth.
Manufactured for Auto Ventshade
Lawrenceville, GA
Alcohol
Prep
Pad
Peel back 2” (5 cm) of tape liner from each end of the visor
flange.
Align visor to the previously cleaned surface. With the visor in its
final position, remove the remaining tape liner by pulling on free
ends.
Apply pressure along all flange edges to ensure good adhesion.
Apply pressure along all flange edges to ensure good adhesion.
7
8
