Installation Instructions
Page 1 of 2
I - Sheet Number
AVR01Rev.B
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic “brush-style” car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Car Wash Supplies
Clean Towel
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Alcohol Pad x2
Contents
Front Driver
Side Visor
Tools Required
NOTE: Actual product may vary from illustration.
Preparation Before Painting / Installation
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Front Passenger
Side Visor
Clean the painted surface of the window frame with an
alcohol pad, and wipe dry with a soft cloth.
1
2
Peel back 2” (5 cm) of tape liner from each end of the visor
flange.
Aerovisor
®
Deflector
Manufactured for Auto Ventshade
Lawrenceville, GA
Alcohol
Prep
Pad
Contents - 4 Piece Set
Front Driver
Side Visor
Front Passenger
Side Visor
Rear Driver’s
Visor
Rear Passenger’s
Visor
Alcohol Pad x4
