29
together we’re going places
Truma Ultraheat - 230V Mains Operation
Before switching on ensure that the electrical fuse
spur protecting the Ultraheat is in the ON position.
The position of this switch varies from model
to model so please familiarise yourself with
the location of this switch before using your
vehicle for the first time.
• To switch the unit on turn the rotary outer
switch to the desired heat output level -
500W, 1000W or 2000W.
• Set the central thermostat knob to the
desired room temperature (1 to 9). The actual
setting of the thermostat must be determined
individually depending on the heating
requirements for each customer.
• To switch the unit off rotate the outer switch
to the off (‘0’) position.
Trumavent Blown Air Heating System
The Trumavent Blown Air System distributes
warm air through the blown air ducting throughout
the vehicle.
• Set the rotary control on top of the S3002
to either manual or automatic setting.
• On the manual setting the speed of the blown
air fan is controlled via the central control
knob that gives settings from 1 to 5,
(5 being the highest).
• On automatic setting the heat output is steadily
adjusted to the respective heat emission from
the heater. The maximum setting of the fan
can be set by the central control knob and
the output will vary between this value and
the slow running setting.
• To turn off the blown air system rotate the outer
control to the central OFF position.
Manual
Automatic
Off
Truma S3002 Vehicle Space Heater
Owners Handbook :
7507 - AT Apache - Tracker Owners Handbook V3 REPRO_Layout 1 23/10/2013 09:11 Page 29