10
Remote Transmission
You are transmitting the
signal to control unit
In – Range Indicator
You are within the remote
control range.
Trunk Release
Trunk
open. Trunk symbol only.
Low Battery
You have to replace the
battery of remote control.
Vibration Mode
Remote Control vibrates
when the system is
triggered
Ignition On
Power Save Mode
Save the battery power
Driver paging
Someone is paging you in
front of your vehicle.
**
**
Press the valet switch in the vehicle with the Ignition OFF to page
the driver carrying the XT-42 two-way remote control.
PROGRAM MODE FOR LCD REMOTE CONTROL TRANSCEIVER:
Press and hold all four remote control buttons simultaneously unit
one long beep is heard. LCD Programming has now been entered.
Transceiver
Button
System Function
Remark
Program Mode
-
Switching code for 2nd / 1st Car
Operation
Press within 5
seconds
Program Mode
-
Melody / Vibration Mode
Press within 5
seconds
Program Mode
-
Power Save Mode
Press within 5
seconds
LCD screen lamp turns on for 5
seconds.
-
+
Clear the Flash Icon and Melody
Sound
Press within 3
seconds
1. Second Vehicle Security Operation:
Your remote transmitter can be
utilized to control a second vehicle’s Auto Page security system. To
program the remote control transmitter to a second vehicle, follow the
instructions for Transmitter programming. All programming parameters
are the same except for the following:
