background image

 

12

   

 LCD REMOTE CONTROL TRANSCEIVER

:

 

 

          

 

Note:

   If the system is interfered by stronger radio 

frequency around, sources of high voltage 
electric power or such Obstacles like tall 
buildings and so on, the transmission range 
may get shorter as the system uses low out 
put powered frequency.    

 

BATTERY REPLACEMENT: 

A 1.5V type AAA Alkaline battery powers the Remote 
Transmitter. When the power of the battery weakens a 

 icon shall be displayed on the LCD screen. When 

the old battery is replaced to new one, there will be beep 
sounds indicate the power is up and the clock on the LCD 
screen returns to 

AM12:00

 after displaying all the icons. 

Correct the time by pressing 

 for 3 seconds before 

using (See Timer Setting). 

 

Note: Press the 

 

button two times when the battery compartment is empty, 

and then insert the new battery.

 

 

THE REMORE LCD ICONS WITH FUNCTION:

 

 

Door Lock 

Your vehicle doors  
 are locked  
   

 

Door Unlock 

Your vehicle doors are 
unlocked and the system is 
Disarmed

 

 

Armed Mode 

Your vehicle is  
in armed mode 

 

 

Valet Mode 

All the function shall be 
temporarily on hold.

 

 

Remote Transmission 

You are transmitting the 
signal to control unit

 

 

In – Range Indicator

 

Your are within the remote 
control range.  

Содержание RF-520LCD




















Отзывы: