7
Vibration Mode
Remote Control vibrates
when the system is
triggered
Button Lock
Disable the transmission
function temporarily
Driver paging
Someone is paging you in
front of your vehicle
Low Battery
You have to replace the
battery of remote control.
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
Description
Operation
(1 second)
LCD screen lamp turns on for 5
seconds.
Press and hold for 1 second
1 melody sound to confirm enters.
(3 seconds)
Timer Programming Mode.
Press and hold for 3 seconds
2-melody sounds to confirm enter.
(5 seconds)
Power Save Mode
Press and hold for 5 seconds
1 melody sound to confirm enters
-
-
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
-
(2-second)
Button Lock
( )
enable /
disable
Press within 3 seconds and Hold
button for 2 seconds
-
(
2-second)
Melody / Vibration
(
)
Mode
Press within 3 seconds and Hold
button for 2 seconds
-
(2-second)
Program Count Down Timer
(
)
(10-Minute / 20M / 30 M
/1Hour /1.5H / 2.0H)
Press within 3 seconds cycling
*leave the buttons starting count
down then
flashes
-
(
2-second)
Enable / Disable Bi Sound
(Bi)
While Pressing Button
Press within 3 seconds and Hold
button for 2 seconds
1. Screen Lamp ON:
Press and hold the
button one s econd, one melody will
sound and the LCD screen lamp will turn on for 5 seconds.
2. Power Save Mode:
While in the power save mode, the
LCD remote transmitter uses “0” current to save the
battery power.
Entry:
Press & hold the
button for 5 seconds, one
melody will sound and the
icon on the LCD
screen indicates entry of the “power save mode”.
Exit:
Press any button of the LCD remote transmitter to
