User’s Manual – 400E Series
Page 23
RP 410E
Operation
Introduction
The RP 410E is a remote panel for
DCU’s in the 200 and 400 series.
It can monitor and control up to eight
DCU’s.
Home
The small Home button always
displays the first page of instruments.
If the RP is connected to more than
one DCU, then the Home button
displays the engine overview to select
an engine first.
Note! Long-press (~1 sec) the Home
button is a shortcut to the main menu.
Alarm List
Press this button to enter/leave the
alarm list.
Start
Press this button to initiate the start
procedure.
Stop
Press this button to initiate the stop
procedure.
Screen Layout
The screen is divided into three main
sections:
Status bar
The upper bar on the screen is the
status bar.
It displays engine status on the left-
hand side, and status indication
symbols on the right-hand side.
Softbutton bar
The bottom bar on the screen is
reserved for softbuttons.
Softbuttons change depending on the
current screen.
Main screen area
This is where all instruments and
menu icons are displayed.
Status bar
Main screen
area
Softbutton bar
