2. Network settings. Make sure to follow common network configuration
practice and take care when several units need to operate within the same
network.
4.2 Configuration Dependency
The behavior of the panel depends somewhat on its configuration.
For instance, the start/stop buttons can be configured either as
latched
, meaning the DCU
completes the start/stop cycle once the button is pressed, or
hold-to
, meaning the operator
must keep the button pressed until the engine has started or stopped.
The configuration of the DCU is not part of this document.
4.3 Main Elements of the Touch Screen
The DCU 210E (not the DCU 208E) uses a touch screen for all user interaction.
The DCU 208E does not have a user interface; please see the RP 210E Remote Panel
section.
4.3.1 Screen Navigation and Hot-spots
The screen has a few
hot-spot
areas predefined for certain functions.
For instance, pressing the left-hand side of the screen moves to the previous page (if any).
To do this
Press this
Select page
Center of the screen
Previous screen
Left-hand side
(midway) of the
screen
Next screen
Right-hand side
(midway) of the
screen
Screen animations will aid the user in understanding the different hot-spot actions.
Select Page
Press the
center
of the screen to get a miniature (thumbnail) of all the instrument pages for
easy access.
This is the quickest and easiest way to get an overview and select what page to navigate to.
Page 6 (20)
