Active Alarms will stay displayed until they go inactive.
6.1 Filter Alarms
The alarm list can filter alarms in three groups as follows
●
All Alarms
(alarms and diagnostics)
●
Panel Alarms
(alarms, no diagnostics)
●
Diagnostics
(diagnostics only)
Press the corresponding button at the bottom of the screen for the desired filter to take
effect.
The filter currently in use is displayed on the second line of the alarm list, e.g.
All Alarms
.
6.2 Silence the Buzzer
Entering the alarm list will also automatically silence the buzzer.
If the buzzer sounds while in the alarm list, then press the
Ack. Alarms
button to silence it.
6.3 Acknowledge a Single Alarm
● In the alarm list, select the alarm to be acknowledged. Observe that the selected
alarm line will expand to reveal additional information, if any.
● Press the
Ack. Alarms
button to acknowledge the selected alarm.
6.4 Acknowledge All Alarms
● In the alarm list, press and hold (1 sec) the
Ack. Alarms
button. This acknowledges
all active alarms.
Page 20 (20)
