manualshive.com logo in svg

Auto Crane HC-10 NEXSTAR, Руководство пользователя, Страница: 51 / 92

Поделиться
Скачать
Auto Crane HC-10 NEXSTAR Скачать руководство пользователя страница 51

51

Maintenance

HC-10 NEXSTAR

NexStar Control Valve Cartridge Maintenance

Use the following procedure to inspect the cartridge for proper operation:

1.  Clean the area around the valve spool before it is removed from the valve bank.

2.  Remove the valve spool from the valve bank. Be careful not to touch any surrounding objects.

3. 

Use any off-the-shelf automotive brake cleaning fluid to remove any visible debris from the valve 

spool. Wear skin and eye protection while spraying the valve spool clean.

4.  Inspect the O-rings for damage. Replace if necessary.

5.  While collar is pulled back, valve should slide freely.

6. 

Dip the valve spool into fresh hydraulic fluid to lubricate and fill the cavities.

7.  Install the valve spool into the valve block.

8.  Validate the operation of the crane related to this valve spool.

Verify movement in ports while 

manually overriding cartridge

Содержание HC-10 NEXSTAR





























































































Отзывы:

Нет отзывов