AUTHOR Alarm VOLK, Руководство по эксплуатации

Страница: 5 / 12

5
Alert modes
1. Standard mode
In case of electromagnetic interference the device will
be sending constant signal to the siren and to «status»
output wire. The device switches off the alert in 0-8
seconds after the electromagnetic interference stops.
The duration of alert will not exceed 1 minute.
2. Impulse mode
In case of electromagnetic interference the device will
be sending impulse signals to the siren and to «status»
output wire that will last for 20 seconds until the
interference disappear. (The duration of each impulse
lasts 2 seconds and the pauses between impulses last
2 seconds).
If the high intensity interference will be still present,
the device will give out new alert signal in 1 minute
after the first alert was switched off. The duration of
this new impulse will last for not less than 20 seconds
until the interference disappear. The maximum number
of alerts before ignition switch on/off is equal to 2.
3. 6/30 mode
In case of electromagnetic interference the device will
be sending impulse signals to the siren and to «status»
output wire that will last for 30 seconds (regardless the
duration time of interference).
If the electromagnetic interference level will still be
high after the first alert the module will give out new
alert for 30 seconds. It will start in 5 seconds after the