VII) Marking
After being tested and
adjusted, each visual level controller is sealed by AUTEXIER. If another agency makes a
mark by punching the visual level controller should not be damaged. Poorly executed, deformations could make tap
fugitive, or inoperative. Punching of thin walls is prohibited.
Level indicators are identified by a label with the following information:
-
The date of shipment
-
Specifications
:
1
-
Designation: Reference of visual level controller
2
-
Calibration certificate number
and du
number of
declaration of conformity to directive
2014/68
/EU
3
-
Maximum condition of use from reflex glass
indicator
4
-
Envelope pressure test from visual level controller
5
-
Set pressure (xx for this product)
6
-
Group of fluid G for Gas / L for Liquid or S for
Steam
7
–
Inlet nominal diameter and outlet nominal
diameter
-
with number of identifying the notified body 0038 (Lloyd's)
It is imperative to respect the conditions of use stated on the rating plate (pressure, temperature, and fluid)
under penalty of equipment damage and void the warranty.
Ref. Document 0904DA140E version01 of 3 May 2018
