TPMS Service Operations
Relearn Operations
64
Figure 5- 8
Sample Relearn Function Main Screen
The OEM sensor information and specification, and relearn procedure
for each vehicle will display on the right side of the screen. Please read
the relearn procedure carefully before performing the relearn function.
To perform TPMS Relearn function
1. Establish the communication with the test vehicle via the MaxiVCI
V100. Power on the Display Tablet.
2. Turn the ignition on but do not start the engine.
3. Tap
Relearn
tab on the screen and select the specific function to
continue. Details are explained in the following sections.
5.4.1 OBD II Relearn
This function allows writing the sensor IDs to the TPMS ECU without
performing other procedures.
NOTE
: Make sure all sensors are checked before performing the OBDII
Relearn function.
To perform OBDII Relearn function
1. Tap
OBDII Relearn
to write IDs to the vehicle directly without
performing further procedures.
2. A message will appear when the sensor IDs are successfully written.
