Autel MaxiPRO MP808TS, Руководство пользователя

Страница: 32 / 167

25
2. Tap the Data Logging button. The button displays blue during the
active recording process.
3. Tap the Data Logging button again to end recording. A submission
form will display to let you fill in the report information.
4. Tap the Send button to submit the report form via the Internet. A
confirmation message displays when sending is successful.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the
following items:
1. Menu Title
– indicates the menu subject of the Main Section.
2. Voltage Icon
– indicates the voltage status of the
vehicle .
Main Section
The Main Section of the screen varies depending on the stage of operations.
The Main Section can show vehicle identification selections, the main menu,
test data, messages, instructions, and other diagnostic information.
Functional Buttons
The displayed Functional Buttons at this section of the screen vary according
to the stage of operations. They can be used to navigate, save or clear the
diagnostic data, exit scanning as well as make other functional controls. The
functions of these buttons will be introduced respectively in the following
sections of the corresponding test operations.
Screen Messages
Screen messages appear when additional input is needed before proceeding.
There are mainly three types of on-screen messages as to their purposes:
Confirmation, Warning, and Error.
Confirmation Messages
Confirmation messages usually display as an
“Information” screen, which
inform you when you are about to perform an action that cannot be reversed
or when an action has been initiated and your confirmation is needed to
continue.