54
select the
Bluetooth
from the connection mode list. Pair the tool
with the V200 by tapping the device serial number on the screen.
3. When pairing is successful, the connection status will read,
“
Paired
.
”
4. The current version of the VCI firmware will be displayed. Tap
Check for firmware updates
to check if an update is available.
If an update is available, tap
Get the new version
to upgrade
the firmware or tap
Cancel
to exit the upgrade.
Upgrade via USB
To upgrade the MaxiVCI V200 firmware via USB
1.
Connect the V200 to the key tool using a USB-C cable.
2.
On the MaxiIM Job Menu, tap
Settings
>
VCI Manager
and
select the
Firmware Upgrade
from the connection mode list.
3.
The current version of the VCI firmware will be displayed. Tap
Check for firmware updates
to check if an update is available.
If an update is available, tap
Get the new version
to upgrade
the firmware or tap
Cancel
to exit the upgrade.
10.4 System Settings
This function provides you with direct access to the System Settings screen,
where you can adjust various system settings for the tool, including wireless and
network settings, and various device settings such as sound, display, and
language settings.
10.5 Units
This option allows you to set the units of measurement system for the diagnostic
system.
To set the units of measurement system
1.
Tap the
Settings
application on the MaxiIM Job Menu.
2.
Tap
Units
.
