16
4.2 Operation
To generate the universal key
1.
Acquire or enter the vehicle information and tap the correct key
information when displayed to view detailed operation instructions.
2.
First check that a battery is installed in the universal key, then place
the universal key into the key slot of the tool, and tap the
Generate
Universal Key
button to start generation. If the universal key is not
placed correctly, a warning message will display reminding you to
place the key correctly and keep it stable.
3.
Keep the universal key stable in its place during key generation.
You can tap the
IMMO
button to directly enter the IMMO function.
NOTE
Ensure that there is only one universal key within 4 inches (10 cm) of
the
device’s key slot to avoid signal interference.
Figure 4-3 Operation Instructions Screen
Scroll down the screen to view the following help information:
1.
If you need to customize button functions, use Button Customization under
Special Functions.
2.
Common causes for failure in universal key generation function are as
below: dead battery, universal key incorrectly placed, and environmental
interference, etc.
