98
Zero Baseline
The zero baseline is marked the 0 value in the Y-axis, showing the ground level of
each channel waveform. After the channel is selected, the zero baseline can be
adjusted by dragging the baseline marker up/down along the Y-axis, or dragging the
waveform up/down or moving the screen up/down in the grid.
NOTE
Tap the baseline marker to make the vertical scale line thinner. In this case, the
waveform is unselected and cannot be dragged. Tap the baseline marker again to
select.
Figure 1-11
Sample Zero Baseline Screen
Wiring Diagram and Help
Tap the arrow button in the lower right corner of the screen to open the Wiring
Diagram and Help window.
The
Wiring Diagram
function provides the connection diagram, operation steps
and operation notes.
The
Help
function provides the content-sensitive help, displaying information
relevant to the procedure, operation or instructions.
