10
Figure 4-1
Sample Health Check Screen
Health Check Report contains the following four types of health rating options:
1.
Good
– The vehicle is in fine health state with no fault codes detected.
2.
Acceptable
– The vehicle is in fair health condition with some fault codes detected.
3.
Bad
– The vehicle is in poor health status with some fault codes detected.
4.
Unknown
– The vehicle's health state is unidentified with unknown number of fault
codes.
On the top left corner, a dashboard with specific health rating and the total number of
DTCs found will display. MIL status indicates if the Check Engine Light (MIL) is on or off.
On the right side, the readiness status checks I/M (Inspection/Maintenance) readiness and
shows the numbers of monitors that are ready, not ready, and not supported.
The middle of the screen consists of two sections. The first section varies according to the
following different diagnosis types.
The EOBD diagnosis consists of the following sections:
1.
DTCs status
– lists all the DTCs detected during the EOBD diagnosis.
2.
Readiness status
– reports the readiness status of the vehicle. Tap the
○
>
button to view readiness status of specific systems.
The manufacturer-related health check consists of the following sections:
