36
6. Calibrate the remote controller
If the stick works improperly, we recommend that you calibrate the remote
controller. You can use the Autel Explore App to calibrate the remote controller or
perform the following steps:
1. Turn on the remote controller. Go to App camera page. Then click Setting
(
) -> Remote Controller -> Remote Controller Calibration. Two 米-shaped
and two horizontal bars will appear on the screen, representing the left and
right command sticks and dials, respectively.
2. Stick calibration: Push and hold the stick one by one in eight directions until
you hear a beep each time.
3. Dial calibration: Turn the dial clockwise until you hear a beep and then turn it
counterclockwise until you hear another beep.
7. Command stick mode
Three command stick modes are provided: mode 1, mode 2, and mode 3. You can
set this in the Autel Explorer App based on your own preferences. By default,
"Mode 2" is used by the remote controller. In this mode, you can move the left
command stick to control the elevation and heading of the aircraft and move the
right command stick to control the forward and backward pitch of the aircraft and
left or right orientation.
