22
Figure 3.10
3)
Double press
ESC
to return to previous menu.
C.
LED Test
The
LED Test
function verifies if the I/M Readiness LED indicator
lamps are functioning properly.
1)
Use the
UP/DOWN
scroll button to select
LED Test
from the
Tool Self-test
menu, and then press the
OK
button.
2)
In the
LED Test
menu, use the
UP/DOWN
scroll button to
select one or more LED lamps to check. The LED should turn
on or off according to the selected commands.
Figure 3.11
3)
When completed, press the
ESC
button to exit.
Update Mode
This function allows you to update the scan tool software and DTC
library through a computer.
Keyboard Test
Press any key to
start test
key:
Double [ESC] to return
LED Test 1/3
RED LED ON
YELLOW LED ON
GREEN LED ON
