18
Compression
IGN Required Monitors
√
MIS
√
BP
√
FUEL
√
EGS
√
CCM
√
PM
√
HCCAT
√
EGR
√
NCAT
3)
Allowed INC Monitors
From
Configure Monitors
screen, use the
UP/DOWN
scroll button to
select
Allowed INC Monitors
, and press the
OK
button.
Emissions tests vary depending on the geographic or regional area in
which the vehicle is registered. So the scan tool provides a more
flexible way to meet different standards, which allows the user to
select 0, 1, 2, 3 „not complete‟ monitors in test.
4)
Reset Factory Default
From
Configure Monitors
screen, use the
UP/DOWN
scroll button to
select
Reset Factory Default
, and press the
OK
button.
It will restore the default configuration settings in the
Configure
Monitors
menu, and delete any customized settings. In this case,
Spark IGN Required Monitors
and
Compression IGN Required
Monitors
will include all the available monitors, and the
Allowed
INC Monitors
will be set to 1.
The tool will display an information message to ask for your
confirmation. Select
Yes
to proceed and
No
to exit without change.
Unit of Measure
Metric is the default measurement unit.
1)
From
System Setup
screen, use the
UP/DOWN
scroll button to
select
Unit of Measure
and press the
OK
button.
