77
Loosely mounted starter motor, series-parallel switch,
magnetic switch, solenoid, starter relay, etc.
2.
Check state-of-charge of battery. For accurate cranking voltage
test results, the battery must be at least 75 percent charged.
3.
Make sure the handbrake on and the gear is on N or P.
STARTER TEST PROCEDURE
There are two ways to do this test.
A.
Connecting to DLC with OBDII connector.
B.
Connecting to battery with probes.
Follow the steps to complete the test:
1.
Perform PRETEST.
2.
Turn off all of the vehicle's electrical accessories.
3.
Connect the tool to vehicle’s DLC with OBDII connector, or
contact the scan tool probes to the battery: red to the positive (+)
terminal, black to the negative (-) terminal.
4.
Turn on the scan tool and wait for
Main Screen
to appear.
(Figure 3.1)
5.
Use the
UP
/
DOWN
scroll button to select
START TEST
from
main screen. (Figure 3.1) The scan tool will show as below.
Figure 8.1
