36
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do
not erase the codes before the system has been checked completely
by a technician.
NOTE: Erasing codes does not mean that trouble codes in ECU
have been eliminated completely. As long as there is fault with the
vehicle, the trouble codes keeps on presenting.
This function is performed with key on engine off (KOEO). Do
not start the engine.
1)
Use the
UP/DOWN
scroll buttons to select
Erase Codes
from
Diagnostics
Menu
and press the
OK
button. (Figure 5.4)
2)
A warning message comes up asking for your confirmation.
Figure 5.8
If you do not want to proceed with erasing codes, press
ESC
button or use
LEFT/RIGHT
scroll button to select
NO
to
exit. A message of
“Command Cancelled!”
shows up. Wait
a few seconds or press any key to return to
Diagnostic
Menu
.
3)
Press the
OK
button to confirm.
If the codes are cleared successfully, an “
Erase Done!
”
confirmation message shows on the display.
Erase Codes
Erase trouble codes!
Are you sure?
YES
NO
