26
3.2.4 Ground station calibration
If the rocker is abnormal (for example, the ground station falls on the ground or the flight direction
of the aircraft is not consistent with its operation direction), it is recommended to recalibrate the
controller. You can calibrate the remote controller by using Autel Voyager App, or calibrate by the
following steps.
1. Enter the aircraft setting interface, select the option of remote controller, and open the option of
remote controller calibration.
2. Select "Calibrate". The left and right rollers and left Right rocker legend will appear on the
screen, and the remote control will emit a rapid and intermittent beep.
3. Follow the direction of the arrow on the screen, turn the roller clockwise and hold for 1 second
until you hear a beep, then turn it counterclockwise until you hear a beep. Next push and hold the
rockers in eight directions one by one until you hear a beep every time. When the ground station
no longer emits the rapid and intermittent beep or the screen shows "Calibration completed", it
means that the calibration has been completed.
