manualshive.com logo in svg

AUTEC Dynamic Series, Руководство пользователя

Поделиться
Скачать
AUTEC Dynamic Series Скачать руководство пользователя страница 24

Dynamic Series 

Part A: Description, warnings and instructions

Working 

A - 18

6 Working 

6.1 BATTERY

The Dynamic series' transmitting units can only be powered through Autec re-
chargeable batteries. 
See the battery charger manual enclosed in the packaging with the battery charg-
er for any warnings and instructions regarding the batteries.

Batteries shall be inserted in their housing in the transmitting unit, with the tech-
nical data plate facing down and their contacts towards the contacts on the trans-
mitting unit.

To insert a battery, proceed as follows:
1. push the battery towards the contacts on the transmitting unit
2. push the battery downwards.

To remove a battery, proceed as follows:
3. push the battery towards the contacts on the transmitting unit
4. lift the battery. 

6.2 S-KEY

In the transmitting unit, the radio remote control address
is stored in the S-KEY. For this reason, the radio remote
control cannot work without this key.

The S-KEY can only be used in the transmitting unit
of the radio remote control where it belongs (main
transmitting unit).

2

1

4

3

Содержание Dynamic Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды