AUTEC Dymanic Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 12

AUTEC Dymanic Series Скачать руководство пользователя страница 3

Technical data sheet

AUTEC

Dynamic Series

LIARME01-00.fm

Part D: ARM receiving unit

D - 3

ENG

2 Technical data

Power supply  ......................................................................................................... 8-30 V
Antenna ................................................................................................................ dedicated
Rated current of outputs STOP_1 and STOP_2 ...........................................  7.5 A (30 V )
Rated current of output SAF_1  .....................................................................  7.5 A (30 V )
Rated current of output SAF_2  ........................................................................  3 A (30 V )
Rated current of digital outputs ........................................................................  4 A (30 V )
Rated current of analogue outputs (PWM)  ......................................................  2 A (30 V )
Rated current of analogue outputs (voltage)  ..............................................  10 mA (28 V )
Protection SAF_2 (fuse F1)  .............................................................  3 A (32 V , autofuse)
Protection of power supply (fuse F2) .............................................  7.5 A (32 V , autofuse)
Protection STOP_1 (fuse F3)  .......................................................  7.5 A (32 V , autofuse)
Protection STOP_2 (fuse F4)  .......................................................  7.5 A (32 V , autofuse)
Protection SAF_1 (fuse F5)  ..........................................................  7.5 A (32 V , autofuse)
Housing material ............................................................................................ PA6 (20% fg)
Protection degree  ....................................................................................... IP65 (NEMA 4)
Dimensions  ............................................................. 200 x 230 x 95 mm (7.9 x 9.1 x 3.8 In)
Weight .............................................................................................................  3 kg (6.6 Lb)

3 Technical data sheet

The technical data sheet contains the wiring diagram showing the connection be-
tween the receiving unit and the machine.
It also contains the transmitting unit configuration and shows the matching be-
tween commands sent and machine functions/movements.

The technical data sheet must be filled in, checked and signed by the installer,
who is responsible for a correct wiring.
The technical data sheet must be kept together with this manual (always keep a
copy of this data sheet for administrative purposes).

The wiring of the receiving unit outputs must always reflect the wiring indi-
cated in the technical data sheet.

«
1
2
3
4
5
...
»

Содержание Dymanic Series













Отзывы:

Нет отзывов