Auta 660001, Руководство пользователя

Страница: 9 / 19

E
N
G
L
IS
H
6
5
OPERATION. PANEL CONNECTED THROUGH Wi-Fi (NETWORK 2.4 Ghz)
Open Auta FREE app,
LOGIN or REGISTER
(press to get the
verification code)
Add new Wi-Fi device
(Panel in A.P. mode
and mobile device
connected to the
desired Wi-Fi network)
Manage the
notifications
1
2
3
New user
+
client@auta.es
LOGIN
Forgot password?
email
Password
Verify password
Verification code
CONFIRM
270 s
New user
Panels
1
Monitors
NEW DEVICE
Auta FREE
CONFIRM
Connect new device
2
3
new existing
NEXT
5
4
Network configuration
Please turn on your phone Wi-Fi first, turn off your
mobile data service and VPN service.
Set the panel in AP mode (press the call button
until listen a beep and release it.
Do this 3 times ).
Wait to the panel reboot, every second one white
and blue LED blink.
It indicates panel is in AP mode. Press "NEXT" ...
NEXT
Network configuration
Tap on the Wi-Fi and select the
network that starts by "cctvp2p",
wait until the Wi-Fi icon appears at
the top of the interface
Get out from Auta FREE
app and go to settings
Back to Auta FREE app
and press "NEXT"
1
2
3
this screen
ONLY will appear
on devices
Connect new device
ENTER THE Wi-Fi PASSWORD
AUTA
8
CONFIRM
9
Add device
Device GID: al10854958
Password: default (888888)
10
Device Name:
ADD
11
IMPORTANT :
Make sure your phone/tablet is connected to
your Wi-Fi before press "ADD"
Panels
Panel 1
Monitors
NEW DEVICE
Auta FREE
NOTIFICATIONS OFF
NOTIFICATIONS ON
CUSTOM
Auta FREE
UNIT MOUNT. ANGLE BRACKET MOUNT
1- Take the angle bracket from the kit and situate it 150-160 cm from the floor line.
2- Mark and drill two holes in the wall.
3- Take two nuts from the kit and hammer them into the drilled holes.
4- Fix the angle bracket on the wall by the screws from the kit.
5- Connect all communication wires and fix the door station on the angle mount
bracket by one bolt from the bottom side.
UNIT MOUNT. SURFACE MOUNT
1- Take the surface mount bracket from the kit and situate it 150-160 cm from the floor
line.
2- Mark and drill four holes in the wall.
3- Take four nuts from the kit and hammer them into the drilled holes.
4- Fix surface mount bracket on the wall by four screws from the kit.
5- Connect all communication wires and fix the door station on the surface mount
bracket by one bolt from the bottom side.