Operating manual Heidi Back 2.0
EN
9 | Installation
31
9.2.5
Installing the log drawer
NOTICE
If you have installed Air+ or would like to use it, it is not possible to use the log drawer together with
Air+.
1) First the side cladding and the rear panel must be de-
tached. Proceed as described in the section Removing
the side cladding [
}
on page 53].
1
2
Fig. 27:
Removing the supply air flange
Fig. 28:
Parts changed over
2) Remove supply air flange (1).
ð
With the log drawer appliance part, the supply air
flange can be converted to the rear. If this is not
desired, then as a consequence it will not be re-
quired and can be removed.
3) Remove side part (2) and if necessary mount the sup-
ply air flange (1) in this location.
4) Mount the side part (2) below in the place of the sup-
ply air flange.
Fig. 29:
Inserting the log drawer
5) Reattach side cladding, rear panel, lid and hob.
6) The log drawer can now be inserted.
