9 | Installation
EN
Operating manual Heidi Back 2.0
24
2
1
Fig. 8:
Attaching the hob
3) Attach the small hob (1) and fix from below using the
nuts.
ð
Should you have difficulty in fixing the nuts during
this stage, remove the side cladding and rear
panel from the stove. Proceed as described in the
section Removing the side cladding [
}
on page
53].
4) Place the large hob (2) on to the rubber cushions.
x
Fig. 9:
Transition
5) The transition between the small and the large hob
must be straight and not show any difference in
height.
ð
If the transition is not straight, adjust the adjusting
screws (2) and/or the rubber cushions (1) to the
correct height.
6) If the side cladding was removed, remount it.
9.2.2
Rearranging the flue pipe connection
Fig. 10:
Removing the hob
1) First remove the hob.
2) Detach side cladding and the rear panel. Proceed as
described in the section Removing the side cladding
[
on page 53].
