26
|
Id.Nr.:243701-0
6. TEMPERATURE SETTING
As an aid to setting the temperature, the temperature regulator
knob has 4 main positions, these being:
Position:
➊
Frost protection for the storage tank (up to 30 °C)
➋
c.
40°C
, lukewarm storage water
➌
c.
65°C
, moderately hot storage water
This setting is recommended in order to avoid
unintentional scalding
caused
by water which is too hot.
The device works in a particularly economical manner
at this setting.
The thermal losses are low and the
formation of boiler scale is largely avoided.
Low standby energy consumption
➍
c.
85°C
, hot storage water
Caution:
Turning the adjustment knob as far as possible to the left (frost
protection mode)
does not
set the device heating to zero or switch
it off and the water temperature can still be up to 30°C.
When operating with daytime electricity the temperature
regulator should not be set any higher than "Pos
➌
" (c. 65°C).
Due to the temperature regulator hysteresis (±7 °K) and potential
radiation losses (cooling of the plumbing) the temperatures quoted
are subject to a tolerance of ± 10 °K.
7. THERMOMETER
There is a remote thermometer built into the front panel of the
device for monitoring the stored water temperature.
The display value depends upon the temperature regulator setting.
Only with the adjustment knob at "Pos.
➍
" and after completion
of the warm up process is the maximum display value reached.
For other regulator positions the pointer deflection is reduced
accordingly.
Remote reading thermometer
