background image

ZMPS

Revision 1.0: June 2022

INTRODUCTION & CONTENTS

Introduction

3

Controls

4

Connecting the ZMPS

5

Specifications

7

ZMPS Drawings

8

 

Rating plate and caution marking are marked on the back enclosure of the apparatus

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE 

OR OTHER OUTLET UNLESS THE BLADES  CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE 

TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT 

CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

The lightning flash with 

arrowhead symbol, within 

an equilateral triangle, is 

intended to alert the user to 

the presence of uninsulated 

“dangerous voltage” within the 

product’s enclosure that may 

be of sufficient magnitude to 

constitute a risk of electric 

shock to persons.

WARNING

TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS 

INSIDE. REFER SERVICING 

TO QUALIFIED SERVICE 

PERSONNEL.

The exclamation point  

within an equilateral triangle 

is intended to alert the user 

to the presence of important 

operating and maintenance 

(servicing) instructions in  

the literature accompanying 

the appliance.

For European Union countries: This symbol on  

the product or its packaging indicates that this 

product must not be disposed of with other waste.

Instead, it is your responsibility to dispose of your 

waste equipment by handing it over to a designated 

collection point for the recycling of waste  

electrical and electronic equipment.

Please contact your local authority for further details 

of your nearest designated collection point.

The Australian Monitor ZONEMIX Paging Station 
(ZMPS) is a software configurable paging station with 
a supercardioid gooseneck microphone.

The ZMPS is designed to be used with the ZONEMIX 
system to provide paging and pre-recorded message 
playback to individual zones, combination of zones or all zones. 
Connection to the ZONEMIX is via low cost CAT 5 cable.

Ample label space is provided on the ZMPS for easy operation 
and LED indicators provide the user with visual feedback of 
the zones being paged or if the system is busy.

A rear panel gain control allows level adjustment along 
with an internal audio limiter to guarantee voice 
clarity.

Содержание ZMPS









Отзывы: