AMIS 480P
AMIS 480P
AMIS 480P
AMIS 480P
AMIS 480P
ABOUT
Australian Monitor
Corporate Headquarters
is located in Sydney,
Australia. The
organization has more
than 20 years experience
in the design and
manufacture of audio
amplifiers and
associated products.
They are a dynamic
corporation, priding
themselves on excellent
customer service, better
features and lower priced
products for Sound
Contractors and Audio
Visual Integrators
worldwide.
Architectural and Engineering Specifications
The power amplifier shall be a four channel model capable of delivering
80 watts into 70/100 volt line or 4 ohm loads. The unit shall feature a
signal-present LED and clip indicator per channel. Speaker connection
shall be via a rear panel barrier strip. The amplifier shall have four
balanced XLR inputs; one per channel. Each channel input can be
routed to the next channel via rear panel link switches, eliminating the
need for daisy chaining or Y-split cables. The unit shall also include
fuse protection for overload and short circuit conditions. The unit shall
also feature generous heatsinking for reliable operation in extreme
conditions. The unit shall be of high quality suitable for continuous,
reliable performance. It shall have a frequency response of no less
than 80Hz - 20kHz (- 3dB). Distortion shall not exceed 1% at 1kHz.
The signal to noise ratio shall be -94dB (on 100V setting) or better. The
power amplifier shall be packaged in a rugged 2 rack unit metal
chassis suitable for desk or rack mounting. The amplifier shall be an
Australian Monitor Installation Series model AMIS 480P.
