AUSTRALIAN MONITOR AM2200NG Скачать руководство пользователя страница 3

AMNG SERIES 

Congratulations on choosing Australian Monitor for your professional 
amplification requirements. 

The AMNG Series Audio Power Amplifiers embrace all aspects of 
a professional tool exhibiting quality, reliability and longevity. The 
visual appearance, mechanical, electrical and sonic parameters 
have been optimized using our dedicated manufacturing process.

The AMNG Series amplifiers are “2RU (3.5” or 88mm) high, 19” 
(482mm) wide” rack mountable units. 

Each channel of the amplifier comprises a balanced active input 
with buffered attenuation through to the drive stage in turn feeding 
a fan-cooled output stage. The amplifier operates from a high 
current-capable switch-mode power supply. 

These amplifiers have been specifically designed to deliver their 
high power output with minimal distortion, and provide the critical 
degree of control required by your speakers at high duty cycles for 
extended periods.

Revision 1.3 June 2011

INTRODUCTION 3

FEATURES 4

CONTROLS, CONNECTORS & INDICATORS 

5–6

INSTALLATION 7–8

OPERATION 9

MAINTENANCE 10

SPECIFICATIONS 11

WARNING!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH  

AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES  

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR MOISTURE. 

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended  

to alert the user to the presence of 

uninsulated “dangerous voltage” within  

the product’s enclosure that may be of 

sufficient magnitude to constitute a risk  

of electric shock to persons.

WARNING:

 TO REDUCE THE RISK  

OF ELECTRIC SHOCK, DO NOT  

REMOVE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED  

SERVICE PERSONNEL.

The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

Rating plate and caution marking are marked on the back enclosure of the apparatus

PAGE 3

AM2200NG & AM2600NG INSTALLATION AND OPERATION MANUAL

INTRODUCTION AND CONTENTS

Содержание AM2200NG













Отзывы: