ALC UIM LB L-3 1210xx/1211xx/1213xx_19
To terminate idling
1. While depressing the retaining pawl as far
as possible to the bottom with a finger.
2. Pull the gripring outward.
Stop pressing the retaining pawl with Space your
finger so that it slides between the side plate and the
retaining plate, By pulling, the chain can now be freely
adjusted in both the upper and lower directions.
B
C1
C2
C3
C2
B
1
2
C1
1
2
1. While pressing the retaining pawl as far
as possible towards the bottom
2. Push the grip ring gently inward.
This means the retaining pawl engages the
outer edge of the retaining plate.
1.Thereafter, grip the gripring, rotate it clockwise
a little, until engaged.
2. Push it in. The retaining pawl will automatically
set itself outside of the retaining plate.
Caution:
If the grip ring is pushed in with undue force, the gear
may be chipped or otherwise broken. If it does not set
property, please try again and if the problem persists
take the block out of service for inspection and repair.
C3
1
2
Tip
The lever hoist will engage easier if you
tug on the chain during procedure 2.
C4
Do not fail to make sure that the retaining
pawl has returned from the outside of the
plate to its original position where it holds
the retaining plate. It will thereupon return
to the “normal state of use” as indicated in
step A.
11
1300 100 120
USER INS
TRUCTION MANU
AL
SERIES LEVER BL
OCK L
-3 SERIES
ST
ANDARD/
O
VERL
O
AD PRO
TECTION
