Austin AUSTINDRIVE, Быстрый старт

Страница: 9 / 38

AUSTINDRIVE Assembly Tutorial Rev 3.02 December, 2020
9
APPLY THE GRAPHICS
(Drill first, Label second!)
For workshops and customers designing their own graphics, use the AUSTINDRIVE Graphics
Creator on Google Slides. Labels will be printed from your artwork.
All other kits have a graphics label included, or search YouTube to learn how to make your own
graphic labels without me!
Clean the face of the pedal with Isopropyl Alcohol and let it dry.
However, do not wet the
label or clean it with cleaners. The graphic
may rub-off.
Use sharp scissors to carefully trim the
edge of the included label around the
outside, leaving the black line as the edge.
Before you remove the label backing, center the label on the enclosure
and
lightly tape it down across one side with painter’s tape.
Leaving the painter’s tape on one end, peel the
backing on the opposite end, cut off a small section
of the backing, and press that end of the label onto
the enclosure.
Remove the painter’s tape, then continue to peel the backing of
the label, “ rolling ” the label onto the enclosure.
Spray the newly labeled enclosure
with several coats of clear paint to
seal the edges, and set aside to dry
for at least 2 hours, preferably
overnight.
Cut out the holes with an X-Acto knife or razor blade, cutting with
downward motions to avoid peeling-up the label.