Austin Hughes ATS-02-S, Руководство пользователя

Страница: 22 / 24

www.austin-hughes.com UM-IP-ATS-Q318V1 P.19
< 1.10 > Command Line Interface ( CLI ) Access
Command Line Interface ( CLI ) allows you access the ATS via Telnet or Secure Shell ( SSH ) to
con
fi gure the system settings and login settings.
By default, CLI access via Telnet and SSH are both enabled whereas Telnet can be disabled.
Telnet provides the basic security of authentication by user name and password, but not the high-
security bene
fi ts of encryption.
If you want high security access, you can use SSH for access to the command line interface. SSH
encrypts user name, password and transmitted data.
If you use SSH to access the command line interface, DISABLE Telnet.
CLI and ATS WEBUI shares the same login name & password ( default login name & password are
“ 00000000 “ )
You can change the following settings via CLI access :
i. System
settings
- Change temperature display unit : change the temp unit to be displayed in the WEBUI
- Change system RTC date time : set the system time of the ATS
- Change network settings : change the IP settings of the ATS
- Change features & services
a. Enable / disable management software support
b. Enable / disable SNMP agent ( ONLY shown when management software support is
disabled )
c. Enable / disable WEBUI
d. Enable / disable FTP ( Default is disable and it is for engineering service ONLY )
e. Enable / disable UDP ( When disabled, ATS CANNOT be found by IP setup utilities )
f. Enable / disable Telnet
If you are using WEBUI + SNMP operation mode, please go to the ATS
WEBUI to con fi gure the SNMP settings before you disable WEBUI via
command line interface.
ii. Login settings
- Change login name
- Change login password
- Reset to default login name & password