Austin Hughes Electronics Cyberview NCP-1716 Скачать руководство пользователя страница 22

Страница: 22 / 60

2.4 Changing Operating Parameters

Chapter 2

Baud Rate

Preset with “9600”, changing the parameter will cause the local acess console

malfunction

Rcv Hndahake

Preset with “None”, changing the parameter will cause the local acess console

malfunction

Data / Stop Bits

Preset with “8/1”, changing the parameter will cause the local acess console

malfunction

Xmt Hndshake

Preset with “None”, changing the parameter will cause the local acess console

malfunction

Parity

Preset with “None”, changing the parameter will cause the local acess console

malfunction

Comm Mode

Preset with “FDX”, changing the parameter will cause the local acess console

malfunction

Printer

This setting is not support in this model

Selection

Ethernet Mode

This setting is not support in this model

Multiple

This setting is not support in this model

Sessions

F4 Comm SETUP Menu

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

F5 Misc SETUP Menu

Wprt Intensity

Normal, blank , dim, blank/dim.

Block End

Causes the terminal to send a block of data to the computer with a line terminator as

an ASCII US character and block terminator as an ASCII CR character (US / CR), or

with line terminators as ASCII CR and LF characters and the block terminator as an

ASCII ETX character (CRLF / ETX).

Wprt Reverse

Sets the write-protected characters to appear in reverse

(dark characters on a light background).

Wprt Underline

Sets the write-protected characters to appear underlined.

Ptr Baud Rate

Sets the SERIAL 2 port baud rate to 75, 150, 300, 600, 1200, 2400, 4800, 7200, 9600,

19200, 38400, 57600, 76800, 115200, 230400, 460800.

Ptr Data /

Through the SERIAL 2 port ,the terminal to send and receive 8-bits data with one stop bit

Stop Bits

or two stop bits, or 7-bits data with one stop or two stops bits.

Ptr Parity

Causes the terminal to send the data to the SERIAL 2 port with none, odd, mark, even,

space

parity.

Ptr Xmt

None, DSR, Xon / Xoff, Both .

Hndshake

Ptr Rcv

None, DTR, Xon / Xoff, DTR/Xoff .

Hndshake

P.18

Содержание Cyberview NCP-1716





























































Результаты поиска

Содержание Cyberview NCP-1716

Отзывы:

Похожие инструкции для Cyberview NCP-1716

Бренды по названию

Популярные бренды

Austin Hughes Electronics Cyberview NCP-1716, Руководство пользователя

Результаты поиска

Содержание Cyberview NCP-1716

Отзывы:

Похожие инструкции для Cyberview NCP-1716

Бренды по названию

Популярные бренды