AUSTEM ESS 3kW, Руководство по установке и эксплуатации

Страница: 6 / 20

3. Installation and wiring
3.1 Moving a product
Caution
It is important to lock the cover before moving.
Incorrect handling can cause damage to the product or accidents.
3.2 Installation
C
A
U
T
I
O
N
[Place of installation]
Information to keep in mind when installing the product.
• Avoid places where humidity is high and moisture penetration is may be concerned.
• Avoid p laces where explosive gas, flammable gas, liquid or dusty.
• Avoid places where difficult to repair and check.
• Avoid places where difficult to dissipate heat by the product.
•
Avoid places where easy to be affected by noise, or difficult to separate from device.
[ Ambient temperature ]
• To maintain the product stable for a long period of time, the ambient temperature should be
carefully monitored. Generally temperature is allowed -10°C to +40°C, install in a place that satisfied
these conditions.
• If the ambient temperature exceeds this range(10°C to +40°C) due to the heat from operation, cool
it with a cooling equipment.
• PCS dissipate heat from operation, please secure enough space to prevent thermal saturation.
[ Humidity]
• If humidity is high, it may cause oxidation corrosion of the metal parts and insulation failure may
occur.
• Install in a place where the relative humidity is less than 95% and be caution to prevent
condensation.
[ Installation environment]
• Install in a place free from flammable gas, corrosive gas, oil or water. Also, do not allow conductive
dust such as iron powder to enter.
[ Vibration]
• Install in a place with low vibration.
• I nstall in a place where the vibration acceleration is 20 ~ 50Hz (less than 0.2G) less than 20Hz(less
than 1G).
• When installing in a place with large vibration such as vibrator, carrier, etc. Take anti-vibration
measures by using anti-vibration rubber.
[S pace]
• Ensure sufficient space around the installation site to prevent the cooling effect of the product from
deteriorating.