YL-240 4500KG BASE PLATE CAR HOIST
Installation and operation manual
5
INSTALLER/OPERATOR -
PLEASE READ AND ENSURE FULL
UNDERSTANDING OF CONTENT.
BY PROCEEDING YOU AGREE TO THE FOLLOWING:
• I have visually inspected the site where the lift is to be installed
and verified the concrete to be in good condition and free of cracks
or other defects. I understand that installing a lift on cracked or
defective concrete could cause lift failure resulting in personal
injury or death.
• I understand that a level floor is required for proper installation
and level lifting.
• I understand that I am responsible if my floor is of questionable
slope and that I will be responsible for all charges related to
pouring a new level concrete slab if required and any charges.
• I understand that the lifts are supplied with concrete fasteners
meeting the criteria of the American National Standard
“Automotive Lifts - Safety Requirements for Construction,
Testing, and Validation” ANSI/ALI ALCTV- 2011 and that I will
be responsible for all charges related to any special regional
structural and/or seismic anchoring requirements specified by any
other agencies and/or codes such as the Uniform Building Code
(UBC) and/or International Building Code (IBC).
• I will assume full responsibility for the concrete floor and condition
thereof, now or later, where the above equipment model(s) are
to be installed. Failure to follow danger, warning, and caution
instructions may lead to serious personal injury or death to
operator or bystander or damage to property.
• I understand that lifts are designed to be installed in indoor
locations only. Failure to follow installation instructions may lead
to serious personal injury or death to operator or bystander or
damage to property or lift.
Failure to follow danger, warning, and caution instructions may
lead to serious personal injury or death to operator or bystander or
damage to property.
Please read entire manual prior to installation. Do not operate this
machine until you read and understand all the dangers, warnings
and cautions in this manual.
INSTALLER / OPERATOR
PROTECTIVE EQUIPMENT
Personal protective equipment helps makes installation and
operation safer, however, it does not take the place of safe operating
practices. Always wear durable work clothing during any installation
and/or service activity. Shop aprons or shop coats may also be
worn, however, loose fitting clothing should be avoided. Tight fitting
leather gloves are recommended to protect technician hands when
handling parts. Sturdy leather work shoes with steel toes and oil
resistant soles should be used by all service personnel to help
prevent injury during typical installation and operation activities.
Eye protection is essential during installation and operation
activities. Safety glasses with side shields, goggles, or face shields
are acceptable. Back belts provide support during lifting activities
and are also helpful inproviding worker protection. Consideration
should also be given to the use of hearing protection if service
activity is performed in an enclosed area or if noise levels are high.
CAUTION
THE SAFE OPERATING TEMPERATURE RANGE FOR
THIS PRODUCT IS 41ºF - 104ºF OR 5ºC - 40ºC
WARNING
DANGER
THIS SYMBOL HIGHLIGHTS IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED COULD ENDANGER THE
PERSONAL SAFETY AND/OR PROPERTY OR YOURSELF AND OTHERS AND CAN CAUSE PERSONAL INJURY OR DEATH.
PH 1300 232 153
HIGHLIFT
