Ausrv GT 2021 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 79

background image

www.ausrv.com

Ph: 833 872 8778

20

Jacking Your Trailer

Your trailer is fitted with purpose built jacking points and from January 2021 supplied with a suitable jack. An
appropriately rated bottle jack is an acceptable alternative, however when using the jacking point beneath the trailing
arm ensure the jack is of a retracted height that will fit under the jacking point when the tire is deflated. A suitably rated
“High Lift” jack may be used on the jacking points on the side of the body behind the wheels provided it has the correct
positive engagement fitting to match the trailer. To ensure safe usage the following must be followed:

•

The jack is to be used on level firm ground wherever possible.

•

The wheels of the trailer should be chocked, and no person should remain inside the trailer whilst it

is being jacked.

•

No person should place any portion of their body under a trailer that is supported by a jack.

•

The trailer should be attached to the towing vehicle whilst being jacked.

•

When performing maintenance ensure suitably rated jack stands are used – do not rely on the trailer

being supported by the jack.

Under the chassis

Dangerous Gases

Gases such as Carbon Monoxide are dangerous. When occupying your trailer, the following must be followed.

• Door vent cover must be removed. The cover is for storage purposes only.
• Carbon monoxide alarm must be functional and turned on.
• Never cover permanent vents in the roof or pop top skirt or annex.
• When using a generator, the generator must be placed where carbon monoxide fumes cannot enter

the trailer.

Carbon Monoxide Detector

«
...
18
19
20
21
22
...
»

Содержание GT 2021
















































































Отзывы:

Нет отзывов

Похожие инструкции для GT 2021

Travel TraiIers 29' Swan

Бренд: Jayco Страницы: 54

Бренд: Jayco Страницы: 110

Бренд: Quattro Страницы: 15

Off-Road Camper OP15

Бренд: Opus Страницы: 33

Бренд: Opus Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды