Ausrv GT 2021 Скачать руководство пользователя страница 17

Страница: 17 / 79

www.ausrv.com

Ph: 833 872 8778

Gas Appliance Safety

DO NOT

use gas cooking appliances for comfort heating. This can lead to carbon

monoxide poisoning, which can lead to death or serious injury

DANGER

Gas cooking appliances need fresh air for safe operation.

Before operation:

Open

vents or windows slightly or turn on exhaust fan prior to using cooking

appliance. Gas flames consume oxygen, which should be replaced to ensure

proper combustion. Improper use can result in death or serious injury.

WARNING

•

WARNING!

Gas appliances are certified and have a flame safeguard feature to stop gas flow in the event

of the flame going out. Never interfere with this function or replace appliances with a non-certified type.

•

WARNING!

Slide-out kitchens with cookers should only be operated with an annex fully erected. Failing

to do so may affect the safety and operation of the gas appliance.

•

WARNING!

Slide-out kitchens with cookers must only be used with a flexible connecting hose that is

disconnected from the gas bayonet fitting when in its stored position. Under no circumstances permanently
connect this appliance.

•

WARNING!

Only approved and suitable gas appliances with flame safeguard systems shall be connected

to the gas bayonet (if fitted).

Removing Door Vent Cover

WARNING!

The door vent must be uncovered at any time the caravan is occupied.

Isolating Appliances

WARNING!

Internal gas appliances have an isolation valve fitted to the gas line. During travel these should be

turned to the off position where practical and always turn the valve on the active gas bottle off when towing.

Содержание GT 2021















































































Результаты поиска

Содержание GT 2021

Отзывы:

Похожие инструкции для GT 2021

Бренды по названию

Популярные бренды

Ausrv GT 2021, Руководство пользователя

Результаты поиска

Содержание GT 2021

Отзывы:

Похожие инструкции для GT 2021

Бренды по названию

Популярные бренды