manualshive.com logo in svg

AUSA D 1000 AP, Руководство оператора, Страница: 26 / 72

Поделиться
Скачать
AUSA D 1000 AP Скачать руководство пользователя страница 26

D 900 AP / D 1000 AP / D 1000 APG

24

Operating

the dumper

Emergency start

If the engine cannot start due to a flat battery, another 12V booster battery can be used 
together with the corresponding jump leads to connect the two batteries. If you use the 
battery of another machine or dumper, avoid the two machines touching.

1- Apply the dumper’s parking brake.
2- Open the dumper engine cover.
3- Connect the (+) positive terminal of the battery with the (+) terminal of the 

dumper and with the other cable connect the (-) negative terminal with the (-) of 
the dumper.

4- Start the dumper in the normal way.
5- Disconnect the cables from the terminals, first the (+) positive terminals and then 

the (-) negative terminals.

Parking the dumper and stopping the engine.
Whenever the dumper is parked, either at the end of the day or in order to carry out any 
maintenance work, it should be parked on level ground. Apply the dumper’s parking 
brake. Keep the engine in idle for 1 minute, if the dumper has been working at full load. 
Then turn the ignition key in and anti-clockwise direction to stop the engine. Connect the 
gear stick in such a way that it creates additional holding for the machine in case of the 
parking brake failing. Chocking the wheels with suitable blocks is also recommended. 
Remove the key from the ignition and take it with you. Never leave the key in the parked 
dumper. 

Содержание D 1000 AP









































































Отзывы:

Нет отзывов