AUSA D 1000 AP Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 72

AUSA D 1000 AP Скачать руководство пользователя страница 30

D 900 AP / D 1000 AP / D 1000 APG

28

(fi

g.

2)

(fi

g.

1)

Transporting

the dumper



Securing/immobilising the dumper on the truck bed (fig. 1, 2)

When transporting the dumper on a truck bed or low loader, carefully follow the advice
given in the following chart:

WARNING

Before raising the dumper onto a trailer or truck bed, make certain that the
ramp is strong enough to support the weight of the dumper and that the truck
bed surface is free from debris, oil, grease or ice.
• Do not transport the dumper with the fuel tank full.
• Make certain your seatbelt is properly fastened.
• Move the dumper slowly and carefully up or down the loading ramps.
• Apply the dumper’s parking brake.
• Connect the gear stick in such a way that it creates additional retention for

the dumper in case of the parking brake failing.

• Stop the engine and remove the key from the ignition.
• Apply chocks to the front and rear wheels.
• Firmly secure the dumper to the truck bed or low loader with chains, cables

or slings at the points provided to prevent any movement.
- FRONT AXLE: with the chassis eyelets

(fig. 2)

- REAR AXLE: above the rear wheels.

• Take into account that the securing systems should be

adequate and sufficiently resistant for this purpose.

«
...
28
29
30
31
32
...
»

Содержание D 1000 AP









































































Отзывы:

Нет отзывов