AUSA C 200 H, Руководство оператора

Страница: 96 / 123

C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
94
- If pneumatic wrenches have been used, the torques should still be checked
using a torque wrench.
- Do not force the torque wrench by using extensions (pipes or similar).
Tightening Torques (Nm)
Front wheels Rear wheels
C 200 H
COMPACT
350 ± 50 250 ± 30
C 200 H 350 ± 50 250 ± 30
C 200 HI 350 ± 50 250 ± 30
C 200 H x4 350 ± 50 350 ± 50
C 250 H 350 ± 50 250 ± 30
C 250 HI 350 ± 50 250 ± 30
C 250 H x4 350 ± 50 350 ± 50
C 250 HI LE 350 ± 50 250 ± 30
C 250 H x4 LE 350 ± 50 350 ± 50
Tightening Torques (lbf·ft)
Front wheels Rear wheels
C 200 H
COMPACT
258 ± 37 184 ± 22
C 200 H 258 ± 37 184 ± 22
C 200 HI 258 ± 37 184 ± 22
C 200 H x4 258 ± 37 258 ± 37
C 250 H 258 ± 37 184 ± 22
C 250 HI 258 ± 37 184 ± 22
C 250 H x4 258 ± 37 258 ± 37
C 250 HI LE 258 ± 37 184 ± 22
C 250 H x4 LE 258 ± 37 258 ± 37

Mast: tension and length of mast chains
The tension and length of the mast chains should be checked regularly. They stretch
gradually due to the strain applied to them.
The mast chains should be replaced when their nominal length has increased by 3%.
Length can be checked by counting the links in one meter of 5/8” chain. Nominally there
should be the length of 61 links. The change should be made when there is the length
of 62.5 links, or a maximum of 63.
The chain is tensioned by turning the stop nut
(fig. 1) of the tensioning rods.
(fig. 1)
Periodic
Maintenance
Operations