AUSA C 200 H, Руководство оператора

Страница: 52 / 123

C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
50

Load handling controls (fig. 1)
The mast and the load are moved by using the joystick.
Raising and lowering the mast.
If the joystick is pulled backwards the mast and the forks lift and if pushed forwards the
mast and the forks lower.
Tilting the forks.
If the joystick is pulled to the left, the mast forks tilt backwards (forks lift) and if pushed
to the right, they tilt forward (forks lower).
Side-shift (fig. 2).
By holding down button (5) on the joystick and pulling the joystick to the left, the forks
move to the left.
By holding down button
(5) and pushing the joystick to the right the forks move to the
right.
Always centre the carriage when in transit or when transporting a load.
Additional hydraulic control for attachments (

) (fig. 3).
By holding down button (6) of the joystick and pulling it to the left (towards the operator),
or pushing it to the right, pressure is supplied to the quick hydraulic
WARNING
The fork positioner allows the operator to set the forks with a variable gap
matching different pallet size without removing the forks manually.
Be aware this attachment is NOT foreseen for lateral pushing operation (similar
to an hydraulic clamp).
This type of operation is forbidden, it could be dangerous for the persons and
it is considered a misuse, consequently, the manufacturer does not accept any
claim for damages caused in this way.
(fig. 3)
(fig. 2)
(fig. 1)
Controls and
instruments