background image

OPERATION 

1.

 

Turn on the wall switch to activate the light, the light is now under All Day mode: light works on day and night 

NOTE

: Allow for approximately 30 seconds warm-up time before the sensor resumes normal activity. 

2.

 

To test, walk through the sensor’s detection area. 

3.

 

Movement will activate the sensor and turn the light on, the light will turn the face to the detected zone for approx. 3 

minutes. 

4.

 

After the light is activated, 

keep out of detection area

 and the light will switch off automatically after 3 minutes.    The 

light will be activated again when detecting any movement.               

       

 

If there is continuing movement in the detection zone, the light will stay on until movement ceases. (after 3 minutes) 

     

                                                                                                                                               

 

LAMP REPLACEMENT   

To isolate the unit, first switch off the unit from the mains power.  Allow bulb to cool before attempting to remove it.  

Unscrew the lamp cover and take the old lamp out and replace with new one, close the lamp cover and tighten the screws. 

WARNING: 

This fitting will become hot when in use.    Allow bulb to cool before touching.

   

NOTE: TH E I NTE L LI G EN T MO TI O N SEN S OR  TR AC KI N G LI GH T I S  D ES I GN ED T O I LLU MI N A TE W H EN  TH E 

DET EC TI ON  A R EA I S  EN T ERE D B Y A  P ER SO N AN D WI LL  DE TEC T MO VI NG H EAT  S OU RC E .    TH ERE  I S  N O 

GUA R AN TE E I MP LI ED  T H A T I T WI LL P ROV I D E TO T A L SE CU RI T Y OR PR EVE N T I LL EGA L EN TRY . 

 

SPECIFICATION 

Detection Method: 

Passive Infrared Sensor (with continuously detect function)   

Sensor Range: 

 

10m x 220° (maximum) 

Power source: 

 

AC 120V 

Time adjustment:  

Fixed at 3 minutes approx. 

Load Rating: 

 

J-Type 150 Watts Max. 

 

FCC WARNING: 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation.   

Changes or modifications not expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment.   

Содержание AEC-9339A









Отзывы: